🎁 Golf and Greens Promotion: Get 2 High-Speed Swing Cameras FREE with your ProTee VX while the promotion is active.

ProTee VX is a ceiling-mounted indoor golf launch monitor built for home golf simulators, coaching studios, club fitting and commercial golf facilities. Developed in the Netherlands, it combines dual high-speed cameras, machine vision and A.I.-assisted club tracking to measure detailed ball and club data with feedback in less than 0.3 seconds.

The overhead design keeps the hitting area clear and supports both right- and left-handed golfers without moving the unit. No marked golf balls or club stickers are required, and ProTee VX has no recurring ProTee software fees. ProTee officially supports GSPro integration alongside other compatible simulation platforms.

Golf and Greens supplies ProTee VX throughout Europe and can help you create the complete simulator around it, including the golf simulator enclosure, impact screen, hitting mat, PC and installation.

🎯 ProTee VX Key Features

Ceiling-mounted indoor launch monitor with a completely clear hitting floor.
Dual high-speed camera tracking for independently measured ball and club data.
A.I.-assisted club tracking for clubface, path and impact analysis.
No marked balls or club stickers required.
Less than 0.3-second shot feedback.
Automatic right- and left-handed play without repositioning the unit.
65 × 55 cm / 25 × 21 in maximum hitting area.
No recurring ProTee VX software fees.
Official GSPro integration, including multiplayer gameplay.

⚙️ Dual High-Speed Cameras & A.I. Club Tracking

ProTee VX measures ball and club information independently using high-speed cameras. According to ProTee, the ball parameters used to simulate flight are measured directly by the camera system, while A.I. is primarily used to detect and track the golf club.

This allows the VX to analyse the golf club in three dimensions without requiring physical tracking stickers, while ball speed, launch and spin remain independent from the club-data calculation.

📊 Ball, Club & Flight Data

Ball Data

Ball Speed
Total Spin
Spin Axis
Back Spin
Side Spin
Launch Direction
Launch Angle

Club Data

Club Speed
Swing Path
Club Face Angle
Club Face to Path
Attack Angle
Dynamic Loft
Club Lie Angle
Impact Point Vertical
Impact Point Horizontal

Flight Data

Flight Path
Apex Height
Apex Time
Carry Distance
Total Distance
Air Time
Run
Off Line
Descent Angle

These are the data categories currently published by ProTee for the VX.

🖥️ ProTee Labs – No Annual ProTee Software Fee

ProTee Labs is the software companion for the ProTee VX. It provides shot analysis, customizable data displays, swing-video integration, session statistics, practice tools and simulator-software connectivity.

ProTee currently states that the VX has no recurring software fees. This means there is no mandatory annual ProTee subscription simply to continue using the core VX and ProTee Labs platform.

Third-party simulation software may have its own licence or subscription costs.

🎮 ProTee VX & GSPro Compatibility

ProTee VX has an official GSPro integration through ProTee Labs. ProTee confirms support for all GSPro gameplay modes, including multiplayer.

Always check the current third-party software requirements before purchasing an additional licence.

📐 Room & Ceiling Requirements

Because the ProTee VX measures the ball and club around the hitting area, it does not rely on several metres of ball flight for tracking. This makes it particularly suitable for permanent indoor simulator rooms.

ProTee recommends a mounting height of approximately 9–10 ft / 2.75–3.05 m, with approximately 3.0 m considered optimal. The maximum detection area is 65 × 55 cm / 25 × 21 in.

Your room still needs sufficient width, depth and clearance for a safe golf swing, impact screen and projector installation.

If you are unsure whether your room is suitable, book a free golf simulator consultation with Golf and Greens.

💻 ProTee VX PC Requirements

A compatible Windows PC is required.

Minimum Requirements

OS: Windows 10 64-bit
Processor: Intel Core i7-8xxx @ 3.00 GHz or AMD equivalent
RAM: 8 GB
Graphics: NVIDIA RTX 3060 or Radeon equivalent
Storage: 5 GB available
Internet: Broadband connection

Recommended with Golf Simulation Software

OS: Windows 10 or 11 64-bit
Processor: Intel Core i9-9xxx @ 3.00 GHz or greater, or AMD Ryzen 9
RAM: 16 GB or more
Graphics: NVIDIA RTX 3080 or better, or Radeon RX 6800 XT
DirectX: Version 12
Storage: 30 GB available

For GSPro at 4K, ProTee recommends an RTX 3080 or better, 32 GB RAM and 20 GB storage.

View the Golf and Greens Performance 4K Golf Simulator PC →

🌐 Connectivity

The VX requires a minimum 1 Gbit network connection, with Cat6 Ethernet or higher recommended by ProTee. The launch monitor must be connected directly to the PC rather than through a router or network switch.

A 10-metre Cat6 network cable and USB-to-Ethernet adapter are supplied with the unit.

📦 What's Included?

1 × ProTee VX Launch Monitor
1 × Camera Calibration Plate
1 × 10 m / 32 ft Cat6 Network Cable
1 × USB-to-Ethernet Adapter
1 × Power Cord
1 × Black Stainless Steel Mounting Plate
4 × Mounting Screws
4 × Mounting Plugs

The official ProTee packing list above was updated in February 2026.

🎁 Golf and Greens Promotion: The current Golf and Greens offer also includes 2 High-Speed Swing Cameras FREE while the promotion is active.

🏗️ Build a Complete ProTee VX Golf Simulator

The VX is the tracking system, not a complete simulator room. A full installation can also require a gaming PC, projector, impact surface, enclosure and hitting mat.

Golf and Greens can help you select compatible components:

🏌️ Build Your Own Golf Simulator Bundle →

🛠️ ProTee VX Installation & Setup

Installation involves mounting the VX above the hitting area, connecting it directly to the PC, installing ProTee Labs and calibrating the camera system with the supplied calibration plate.

Correct calibration matters for accurate measurements. ProTee recommends positioning the calibration plate centrally, aligned with the impact screen and level with the hitting surface.

A 2-hour remote launch monitor installation and setup service can be purchased separately from Golf and Greens.

🛠️ Purchase the 2-Hour Remote Installation & Setup Service →

For a turnkey project, Golf and Greens can also arrange on-site installation according to your location and simulator configuration.

Request an On-Site Installation Quote →

📏 ProTee VX Technical Specifications

Type	Ceiling-mounted indoor launch monitor
Tracking	Dual high-speed cameras, machine vision & A.I.-assisted club tracking
Dimensions	83 × 20 × 17 cm
Weight	9.4 kg
Maximum Hitting Zone	65 × 55 cm / 25 × 21 in
Recommended Height	9–10 ft / approximately 2.75–3.05 m
Shot Feedback	Less than 0.3 seconds
Network	1 Gbit minimum, direct Ethernet connection
Operating Power	100 W
Peak Power	600 W
Country of Origin	The Netherlands
GTIN	198715278552

Dimensions, weight, power specifications and GTIN are taken from ProTee's current official product data.

🛡️ Manufacturer Warranty

ProTee provides a one-year limited manufacturer warranty to the original purchaser when purchased from an authorized reseller or distributor, subject to ProTee's warranty terms and exclusions.

⭐ Why Buy ProTee VX from Golf and Greens?

ProTee VX supply throughout Europe
Advice for private and commercial simulator projects
Room and equipment compatibility guidance
Complete simulator configuration
Remote setup available for separate purchase
On-site installation available by quotation
English and French-speaking support

Need help planning your simulator? Book a Free Golf Simulator Consultation →

❓ ProTee VX FAQ

Does the ProTee VX have an annual subscription?

No. ProTee currently states that the VX has no recurring ProTee software fees. Third-party simulator software may have its own licence or subscription.

Is the ProTee VX compatible with GSPro?

Yes. ProTee provides an official GSPro integration through ProTee Labs, including support for multiplayer gameplay.

What ceiling height is recommended for ProTee VX?

ProTee recommends approximately 9–10 ft / 2.75–3.05 m for optimal performance.

Can ProTee VX be used by right- and left-handed golfers?

Yes. Its fixed overhead design allows right- and left-handed golfers to use the same hitting area without moving the launch monitor.

Does ProTee VX require marked balls or club stickers?

No. Specially marked balls and physical club-tracking stickers are not required.

Can Golf and Greens help with installation?

Yes. You can purchase the 2-hour remote installation and setup service, or request an on-site installation quotation.

🏌️ Build your ProTee VX simulator with Golf and Greens

Build Your Own Golf Simulator →

Book a Free Consultation →

Få 5 % rabatt på din första beställning